Selected:

simDrive™ AC Servo System 400W Driver and Motor Set

R8,004.95

simDrive™ AC Servo System 400W Driver and Motor Set

R8,004.95

SKU simDrive400w Categories , Tags , ,

Description

simDrive™ AC Servo System 400W Driver and Motor Set

simDrive Servo System 400W  is a fully compatible set that includes:

  • simDrive AC Servo Driver 400W 325V (M4-H040K Model)
  • AC Servo Motor 400W 220V (CSM40-013M30 model) with a 2500 imp/rev encoder and Hall sensors
  • power cable (5m)
  • encoder cable (5m)

simDrive Servo System provides diagnostic utility software – csServoManager. It is a convenient software installer what basically makes the installation process runs automatically and you do not have to struggle through all the parameters and settings to run the drive. There are just some basic settings you need to do. There are also configuration profile templates in the csServoManager available for 400W motors (CSM-040-230-2500) and 750W motors (CSM-075-230-2500D) ready to load. These profiles contain all electric parameters of a motor, an encoder and hall sensors. Using these ready settings you can save a lot of time and avoid many uncertainties. After you have loaded these ready settings from the configuration profile template and if you have set your simDrive by default as it states in the driver’s manual – there are only final configuration activities left – PID loop tuning.

simDrive a servo driver due to the relatively narrow range of application configuration process is simplified so a user – operator doesn’t have to break through all the dozens of parameters which he won’t use anyway.  The configuration parameters were divided into functional groups what makes the configuration fast and clear.

simDrive Servo Motors have compact architecture and high power density, middle rotor inertia, and rapid response, super high coercivity rare earth permanent magnet, overheat protection capability, strong anti-demagnetization capability, various frame installation size, full-closed design. The motors incl. 5-meter power and encoder cables ended with industrial sockets from the motor’s side. This way you do not have to look for appropriate cables and to wonder how to connect them to the servo motor.

Technical specification of simDrive Servo Motor 400W (CSM40-013M30)

Rated Voltage (V) 220
Rated Power (KW) 0.4
Holding Torque (N.m) 1.27
Peak Torque (N.m) 3.8
Rated Speed (rpm) 3000
Rotor Inertia (Kg.m²) 0.302*10-4
Rated Current (A) 2.8
Voltage Constant (V/1000r/min) 28
Line-Line Resistance (Ω) 5.83
Line-Line Inductance (mH) 12.23
LA(mm) 131
Weight (Kg) 1.9
Encoder Line Number (PPR) 2500
Insulation Class Class B (130°C)
Ambient temperature range -20°C to +50°C
Relative humidity Below 90% RH (without condensation)
Motor Winding Plue Winding lead wire

U (red)

V (yellow)

W (blue)

PE (yellow, green / black)

Plug serial number

2

3

4

1

Encoder Plug Signal lead wire

5V

0V

A+

B+

Z+

A-

B-

Z-

U

+V

+W

+U

-V

-W

-PE

Plug serial number

2

3

4

5

6

7

8

9

10

11

12

13

14

15

1

Additional information

Weight 0.4 kg
Dimensions 10 × 5 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Close Menu
×
×

Cart